Safety Guidelines For Battery Chargers; Working Procedures; Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PAMFW 12 C3 Originalbetriebsanleitung

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks.
Do not allow children to play with
the appliance. Cleaning and user
maintenance tasks may not be car-
ried out by children unless they are
supervised.
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer or the manu-
facturer's customer service depart-
ment or a similarly qualified person.
This charger is suitable for indoor use
only.
WARNING!
■ Do not operate the appliance with a dam-
aged cable, power cable or power plug.
A damaged power cableposes a threat of
fatal electric shock.
ATTENTION!
► This charger can only charge the following
batteries: PAPK 12 A1 / PAPK 12 A2 /
PAPK 12 B1.
► A current list of battery compatibility can be
found at www.Lidl.de/Akku.
│ GB │ MT
■ 48

Working procedures

Working principle:
The oscillating drive causes the application tool to
move back and forth at a speed of 5000–19000
times per minute. This allows for precision work
even in confined spaces.
Sawing/cutting:
■ Use only undamaged saw blades that are in
perfect working order. Bent, blunt or otherwise
damaged saw blades may break.
■ When sawing lightweight construction materials,
follow the statutory regulations and all recom-
mendations from the material manufacturers.
■ Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process.
Sanding:
■ To prolong the service life of the sanding sheets
, ensure that you apply even pressure.

Before use

Removing/charging/inserting the
battery pack
CAUTION!
► Always unplug the appliance before you
remove the battery pack
the battery pack to the charger.
NOTE
► The battery is supplied partially charged. Ide-
ally, fully charge the battery before use. You
can charge the lithium-ion battery at any time
without shortening its service life. Interrupting
the charging process does not damage the
battery.
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
from or connect
PAMFW 12 C3