Safety Guidelines For Battery Chargers; Working Procedures; Before Use; Attaching/Disconnecting The Battery Pack To/From The Appliance - Parkside 315570 Originalbetriebsanleitung

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physi­
cal, sensory or mental capabilities
or lack of experience and know­
ledge, provided that they are under
supervision or have been told how
to use the appliance safely and are
aware of the potential risks . Do not
allow children to use the appliance
as a toy . Cleaning and user mainte­
nance tasks must not be carried out
by children unless they are super­
vised .
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
The charger is suitable for indoor use
only .
WARNING!
■ Do not operate the appliance with a dam­
aged cable, power cable or power plug .
A damaged power cable poses a threat of a
fatal electric shock .
■ 34 │ GB │ MT

Working procedures

Working principle:
The oscillating drive causes the application tool to
move back and forth at a speed of 5000–19000
times per minute . This allows for precision work
even in confined spaces .
Sawing/cutting:
■ Use only undamaged saw blades that are in
perfect working order . Bent, blunt or otherwise
damaged saw blades may break .
■ When sawing lightweight construction materi­
als, follow the statutory regulations and all rec­
ommendations from the material manufacturers .
■ Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process .
Sanding:
■ To prolong the service life of the sanding sheets
, ensure that you apply even pressure .

Before use

Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
♦ Push the battery pack
clicks into place .
Removing the battery pack:
♦ Press the release button
battery pack .

Checking the battery charge level

♦ Press the battery charge level button
check the status of the battery (see also main
diagram) .
The status/remaining charge will be shown on
the battery display LED
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
into the handle until it
and remove the
to
as follows:
PAMFW 20-Li A1