Setting Options; Setting The Start Time; Setting The Drying Time; Setting The Drying Intensity - hanseatic HWT8A3GT Gebrauchsanleitung

Page EN-16

Setting options

Setting options
(15)
(14)
(13)

Setting the start time

This feature allows you to set the start time
of the drying process . You can delay the start
time by up to 24 hours .
1 . Load the appliance and close the appli-
ance door (5) .
2 . Press the On/Off button (1) .
The display will illuminate .
3 . Select your desired cycle and adjust any
additional settings as required .
4 . Press the button for delayed start (15) .
Increase the delay time, if needed, by
pressing the button several times .
5 . Press the Start/Pause button (2) to begin
the cycle .
The delay start indicator will flash .
The drying cycle will begin as soon as the
delay start timer runs out .
6 . If you want to pause the delay start, press
the Start/Pause button .
7 . If you want to cancel the delay start, press
the On/Off button .

Setting the drying time

Additional drying time can be set for the cy-
cles Warm, Cool and Airing .
• To increase the drying time for the three
cycles, press the button for drying dura-
tion (14) .
You can increase the drying duration in
steps of 10 minutes by repeatedly press-
ing the button .

Setting the drying intensity

This setting allows you to further adjust the
drying intensity according to your laundry
items .
The drying intensity cannot be set for every
cycle . The drying intensity indicator will indi-
cate which cycle is supported by this setting .
For this setting, the drying time increases in
steps of 5 minutes . The drying intensity must
be set before starting a cycle .
1 . Select your desired cycle .
2 . To set the drying intensity, press the dry-
ing intensity button (13) repeatedly until
you arrive at your desired drying intensity .
3 . Press the Start/Pause button (2) to begin
the cycle .
(10)
(11)
(12)