Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switching on/off the interior
light
•
Press the button for interior light (10) to
switch the interior light on or off .
The drum's interior light will stay on for
around 3 minutes after being switched on .
Activating/deactivating sound
By default, the appliance will play sounds,
e .g . when the cycle selector is turned, the
settings buttons are pressed, or the drying
process is complete .
•
Press the button for the buzzer (11) to
activate or deactivate the sound function .
Setting the anti-crease
feature
This feature helps ensure clothes do not
crease after the drying process . By default,
the anti-crease phase will run for 30 minutes
after the drying cycle . The duration can be
increased to up to 120 minutes .
The laundry can be removed during the an-
ti-crease phase .
The anti-crease feature can be set for all cy-
cles except for Cool, Airing and Wool .
•
Press the button for anti-crease (12) to set
the anti-crease feature .
Setting options
Activating/deactivating the
safety lock
The appliance is equipped with a special
safety lock that, for example, prevents chil-
dren from accidentally pressing buttons and
interrupting the drying process . The safety
lock can be activated only once a cycle is al-
ready running .
•
To activate the safety lock, press and hold
both the button for anti-crease (12) and
the button for the buzzer (11) simultane-
ously for 3 seconds .
The indicator for anti-crease will appear
on the display . All buttons and the cycle
selector will be disabled, with the excep-
tion of the On/Off button (1) .
•
To deactivate the safety lock, press and
hold both the button for anti-crease and
the button for the buzzer simultaneously
for 3 seconds again .
Customised settings
This feature allows you to save a customised
cycle that you use often and want quick ac-
cess to .
1 . Select your desired cycle and adjust any
additional settings as required .
2 . To save the cycle and settings, press and
hold the button for the interior light (10)
for 3 seconds .
The indicator for the customised setting
will flash on the display .
3 . To select the customised cycle later, turn
the cycle selector (4) to the position "Cus-
tomised" .
4 . To change the customised settings, re-
peat steps 1 and 2 .
Page EN-17
Werbung
Inhaltsverzeichnis
Fehlerbehebung
