Setting Options; Setting The Start Time Preselection; Extending The Drying Duration; Setting The Drying Intensity - hanseatic HWT8A2GT Gebrauchsanleitung

Setting options

(17)
(16)
(15)
Setting the start time
preselection
The "Start time preselection" mode allows
you to set the start time of the drying cycle.
You can delay the start time by a minimum of
one hour up to a maximum of 24 hours.
1. Load the appliance and close the appli-
ance door (2).
2. Press the "On/Off" button (7).
The display (11) will illuminate.
3. Select your desired cycle and adjust any
additional settings as required.
4. Press the "Start time preselection" but-
ton (17).
The indicators and
0H
display (11).
If necessary, repeatedly press the "Start
time preselection" button (17) in order to
select the desired delayed start.
5. Press the "Start/Pause" button (8).
The drying cycle starts as soon as the de-
layed start time runs out.
6. If you want to pause the delayed start,
press the "Start/Pause" button (8).
7. If you want to cancel the delayed start,
press the "On/Off" button (7).

Extending the drying duration

The drying duration can be extended with the
"Warm", "Cool" and "Airing" cycles. The indi-
cator
select one of these cycles.
1. To increase the drying duration for one of
2. Press the "Start/Pause" button (8).
will appear on the

Setting the drying intensity

The "Drying intensity" mode allows you to fur-
ther adjust the drying intensity according to
your laundry items.
The drying intensity cannot be set for every
cycle. If the mode is available for the cycle,
the indicator
For this setting, the drying duration increas-
es in steps of 5 minutes. The drying intensity
must be set before starting a cycle.
Setting options
will appear on the display (11) if you
the three cycles, press the "Drying dura-
tion" button (16).
You can increase the drying duration in
steps of 10 minutes by repeatedly press-
ing the button.
The drying cycle starts.
will appear on the display (11).
Page EN-15
(12)
(13)
(14)