hanseatic HWT8A3GT Gebrauchsanleitung Seite 62

Page EN-28 Troubleshooting
Problem
The laundry is not dry
enough or the drying
duration is too long .
The display shows an error code .
Problem Possible causes
Moisture sensor error
E32
Temperature sensor error
E33
BLDC motor communication error
E64
PCB communication error
E82
Malfunction
Possible causes
The appliance is installed in a
space that is too confined .
The heat exchanger, lint filter (8)
and/or bottom filter (7) are clogged
by lint .
The condensate drawer (9) is full . Empty the condensate drawer .
The water drain hose (19) is not
connected properly .
The ventilation slots are clogged
or obstructed .
An inappropriate cycle has been
selected for your laundry .
Solutions, tips
Check whether the appliance has
enough free space to function
properly .
Clean the heat exchanger, lint
filter and bottom filter .
Check the water drain hose .
Clean the moisture sensor
behind the lint filter (8) inside the
appliance .
Ensure that the ventilation grilles
are not clogged .
Select a cycle with a higher drying
intensity or longer drying time .
Solution
Contact our service department (see
page EN-31) .