Emptying The Condensate Drawer; Cleaning The Lint Filter - hanseatic HWT8A3GT Gebrauchsanleitung

Page EN-20 Cleaning and maintenance
Emptying the condensate
drawer
The condensate drawer (9) must be emptied
after every use . If the condensate drawer is
full, the cycle will stop and the "Condensate
drawer full" indicator will appear . After empty-
ing the condensate drawer, you can press the
Start/Pause button (2) to resume the cycle .
1 . Use both hands to pull out the conden-
sate drawer (9) .
2 . Pour the condensate into a basin .
3 . Slide the condensate drawer (9) back in .

Cleaning the lint filter

The appliance is equipped with a lint filter (8)
for the door . This filter must be cleaned after
every use .
(9)
1 . Switch off the appliance .
2 . Open the appliance door (5) .
3 . Remove the lint filter (8) .
4 . Open the lint filter and remove the lint .
5 . Dry the lint filter thoroughly afterwards .
6 . Insert the lint filter back into the appliance .
(8)
You can also clean the lint filter under run-
ning water .
Ensure that the lint filter is inserted in the
correct position .