The Dishwashing Results Are Not Satisfactory - hanseatic HGTI6082C147735TS Gebrauchsanleitung

The dishwashing results are not satisfactory

Problem Possible cause
There are The rinse aid is incorrectly dosed.
residues or
streaks on the
The dishwasher salt is depleted.
dishes.
The dishwasher salt is clumpy.
The dishes are There are food scraps which are
not completely encrusted onto the dishes.
clean.
The dishes have not been
stacked optimally.
You have selected the incorrect
dishwashing programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low.
The spraying arm can not rotate
unhindered.
The nozzles on the spraying arm
are blocked/calcified.
Troubleshooting table
Solution
Adjust the dispensed dose (see
"Adding rinse aid" on page EN-14).
Add dishwasher salt (see "Adding
dishwasher salt" on page EN-16).
Stir the dishwasher salt using the
end of a spoon or similar.
Soak dirty dishes prior to washing
the dishes.
Stack the dishes in such a way
that all parts can be reached by
the water jets (see "Loading the
dishwasher" on page EN-17).
Select the correct dishwashing
programme (see "Selecting
programme and starting the
programme run" on page EN-23).
Use the correct dosage
of dishwasher detergent
(see "Programme table" on
page EN-21).
Turn the water tap on completely.
Ensure that no dishes are
impeding the motion of the
spraying arm.
Clean the nozzles (see "Checking
and cleaning the spraying
arm and spray nozzles" on
page EN-28).
Page EN-39