Assembling The Shredder; Operation - Silvercrest SSMS 600 E6 Bedienungsanleitung

Assembling the shredder

WARNING! RISK OF INJURY!
The blade 7 is extremely sharp! Handle it with great care at all times.
►
Place the bowl 8 on a dry, level surface.
■
Place the blade 7 carefully onto the holder in the bowl 8. Turn the
■
blade 7 a little while doing this, so that it slips onto the holder.
NOTE
The blade 7 is not completely fixed to the holder. This is normal. The
►
blade 7 is only completely fixed when the bowl lid 6 has been put on.
Add the food you wish to chop into the bowl 8.
■
NOTE
Fill the bowl 8 only up to the 500 ml mark
►
and only up to the 300 ml mark
Put the bowl lid 6 on the bowl 8. When doing so, make sure that the
■
blade 7 is correctly engaged in the bowl lid 6.
Fit the motor unit 4 into the mount on the bowl lid 6. Make sure that the
■
two opposing fixing pins on the motor unit 4 slide into the tracks provided
for this purpose in the mount. Otherwise, the motor unit 4 cannot be con-
nected to the fitting on the bowl lid 6.
NOTE
If you want to store food in the bowl 8, you can use the lid 9. To do this,
►
carefully remove the bowl lid 6 and motor unit 4 and also the blade 7
if necessary.

Operation

WARNING! RISK OF INJURY!
► The food being processed must not be too hot! Splashing contents could
scald the user.
WARNING! RISK OF INJURY!
The blade 7 is extremely sharp! Handle it with great care at all times.
►
SSMS 600 E6
when processing food
when processing liquids.
GB │ IE │
9 ■