Troubleshooting - Beko BBCW13400X Benutzerhandbuch

b. Remove the glass cover by turning it
counter clockwise.
c. If your oven lamp is type (A) shown in the
figure below, rotate the oven lamp as
shown in the figure and replace it with a
new one. If it is type (B) model, pull it out
as shown in the figure and replace it with
a new one.
d. Refit the glass cover.
If your oven has a square lamp,
a. Disconnect the product from the electri-
city.

8 Troubleshooting

If the problem persists after following the in-
structions in this section, contact your
vendor or an Authorized Service. Never try to
repair your product yourself.
Steam is emanated while the oven is
working.
• It is normal to see vapour during opera-
tion. >>> This is not an error.
Water droplets appear while cooking
• The steam generated during cooking con-
denses when it comes into contact with
cold surfaces outside the product and
may form water droplets. >>> This is not
an error.
b. Remove the wire shelves according to
the description.
c. Lift the lamp's protective glass cover with
a screwdriver.
d. If your oven lamp is type (A) shown in the
figure below, rotate the oven lamp as
shown in the figure and replace it with a
new one. If it is type (B) model, pull it out
as shown in the figure and replace it with
a new one.
e. Refit the glass cover and wire shelves.
Metal sounds are heard while the
product is warming and cooling.
• Metal parts may expand and make sounds
when heated. >>> This is not an error.
The product does not work.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The appliance may not be plugged to the
(grounded) outlet. >>> Check if the appli-
ance is plugged in to the outlet.
EN / 49
EN
DE