Beko BBCW13400X Benutzerhandbuch Seite 22

On models with wire shelves :
On models without wire shelves :
Tray stopping function
There is also a stopping function to prevent
the tray from tipping out of the wire shelf.
While removing the tray, release it from the
rear stopping socket and pull it towards
yourself until it reaches the front side. You
must pass over this stopping socket to re-
move it completely.
Proper placement of the wire grill and
tray on the telescopic rails-On models
with wire shelves and telescopic models
Thanks to telescopic rails, trays or the wire
grill can be easily installed and removed.
When using trays and wire grills with the
telescopic rail, care should be taken that the
pins on the front and back of the telescopic
rails, rest against the edges of the grill and
the tray (shown in the figure).
EN / 22