Beko BBCW13400X Benutzerhandbuch Seite 21

On models with wire shelves :
On models without wire shelves :
"0 shelf spot" is the oven floor. Do
not use it other than for microwave.
Placing the wire grill on the cooking
shelves
It is crucial to place the wire grill on the wire
side shelves properly. While placing the wire
grill on the desired shelf, the open section
must be on the front. For better cooking, the
wire grill must be secured on the wire shelf's
stopping point. It must not pass over the
stopping point to contact with the rear wall
of the oven.
On models with wire shelves :
On models without wire shelves :
It is crucial to place the wire grill on the side
shelves properly. The wire grill has one direc-
tion when placing it on the shelf. While pla-
cing the wire grill on the desired shelf, the
open section must be on the front.
Placing the tray on the cooking shelves
It is also crucial to place the trays on the wire
side shelves properly. While placing the tray
on the desired shelf, its side designed for
holding must be on the front. For better
cooking, the tray must be secured on the
stopping socket on the wire shelf. It must
not pass over the stopping socket to contact
with the rear wall of the oven.
Stopping function of the wire grill
There is a stopping function to prevent the
wire grill from tipping out of the wire shelf.
With this function, you can easily and safely
take out your food. While removing the wire
grill, you can pull it forward until it reaches
the stopping point. You must pass over this
point to remove it completely.
EN / 21
EN
DE