Installation / Storage - SPORTSTECH FX3 Pro Benutzerhandbuch

INSTALLATION / STORAGE

1
Set up
To stand the treadmill upright, hold the treadmill at the end of the lower
support arms and lift it up so that you can transport the device on the front
wheels. Once you can fold the support feet completely down, hold the
support feet with one foot and slowly lower the treadmill in your direction.
Make sure that the support is locked before you release the treadmill!
2
Lowering
To release the feet, hold the treadmill at the top, at the end of the treadmill, and press down on the release with your
foot. Hold the release button down while carefully lowering the treadmill and pushing it forward slightly. The lever must
be pressed until the locking point has been overcome and the stand is pressed against the treadmill by lowering it.
2
3
1
STORAGE
Store the device in a clean and dry environment indoors. Never store the device outdoors. Make sure that the circuit
breaker is switched off after use and the
power plug is removed.
34