Belt Adjustment; Moving & Storage Instructions - SPORTSTECH F37 Benutzerhandbuch

MOVING & STORAGE INSTRUCTIONS
Moving your Treadmill
The treadmill can then be moved by tilting the tread-
mill deck towards you onto it's transportation wheels.
(Please ensure the power cord cable has been dis-
connected from the treadmill before attempting to
move it).be lowered to the ground.

BELT ADJUSTMENT

• Place treadmill on a level surface.
• Run the treadmill at 6-8km/h.
• If the belt has drifted to the right, turn the right bolt clockwise a 1/2 turn and turn the left bolt
anticlockwise a 1/2 turn (Picture C).
• If the belt has drifted to the left, turn the right bolt anticlockwise 1/2 turn and turn the left
bolt clockwise a 1/2 turn (Picture D).
• Test for at least 15 seconds at 4km/h (check and adjust a further quarter or half turn until the
belt is centered.
NOTE: The running belt should not be tightened too hard as this can cause noise and damage the machine.
Folding away your Treadmill
A.) Turn off the treadmill, switch off at the main power switch and pull
out the plug.
B.) Lift the treadmill deck up towards the main console. You should feel
the treadmill gas spring system engage.
C.) To lower the treadmill deck, press the gas spring system in with your
foot to disengage the lock. The treadmill deck can now be lowered to the
ground.
33
EN