Setting Up The Device; Exploded Drawing/Spare Parts List - SPORTSTECH FX3 Pro Benutzerhandbuch

0,3 m
1 m 1 m
2 m
DANGER:
While you program the device and engage in any other preparations, never stand on the running
belt. Always use the side treads instead.
Never operate the device at high speed and never try to jump onto the running belt afterwards.
Always increase speed gradually.

EXPLODED DRAWING/SPARE PARTS LIST

SETTING UP THE DEVICE

Set up the device on a level surface and pay attention to the surroun-
ding clear space:
1. There must be at least 2 meters of free space at the rear of the device.
2. There must be at least 1 meter of free space on both sides of the
device.
3. There must be at least 30cm of free space at the front of the device
to allow the device to be folded up and the power cord to be routed
safely.
Do not place the device in front of fume cupboards or ventilation systems.
Do not use the device in a garage, covered courtyard, near water, or
outdoors.
At the following link At the following link
you will find the exploded drawing you will find the exploded drawing
and the spare parts list: and the spare parts list:
https://service.innovamaxx.de/fx3pro_spareparts https://service.innovamaxx.de/fx3pro_spareparts
30