Assembly Instructions - SPORTSTECH FX3 Pro Benutzerhandbuch

ASSEMBLY INSTRUCTIONS

Step 1
Open the packaging and remove the contents. Place the treadmill on a flat surface. Make sure that your assembly
area is clean and that you have enough space. Position the mobile phone holder on the top of the display and then
place the adhesive pad on it to ensure greater adhesion for your mobile device.
adhesive pad
Step 2
• Set up the two stanchions as far as up as they go. You notice a click.
• Then fold the console into a horizontal position on both sides with the handles.
• Check the safety of the stanchions and the locking of the handles by moving them back and forth as well as
pressing the handles. These must be locked and must not fall down on their own.
Caution: Be careful with these steps. There is a risk of being crushed.
Step 3
Align the tread horizontally by turning the screws of the feet in or out at the end of the lower support arms. If neces-
sary, use a spirit level. When stepping on the tread, it must not wobble or stand at an angle. Check the leveling of the
bumps before using the treadmill!
32