Environmentally Responsible Disposal - Aerex Rls T1 Sys Montage- Und Betriebsanleitung

Environmentally responsible disposal

Resetting customer level
All settings undertaken at customer level are re-
set to factory setting. The settings undertaken in
the installer menu are retained.
Environmentally responsible dis-
posal
Old devices and electronic components may
only be dismantled by specialists with elec-
trical training. Proper disposal avoids detri-
mental impact on people and the environment
and allows valuable raw materials to be reused
with the least amount of environmental impact.
Do not dispose of the following
components in household waste!
Old devices, wearing parts (e.g. air fil-
ter), defective components, electrical
and electronic scrap, environmentally
hazardous liquids/oils, etc. Dispose of
them in an environmentally friendly
manner and recycle them at the ap-
propriate collection points (→ Waste
Management Act).
1. Separate the components according to mater-
ial groups.
2. Dispose of packaging materials (cardboard,
filling materials, plastics) via appropriate re-
cycling systems or recycling centres.
3. Observe the respective country-specific and
local regulations.
Company information
© Aerex HaustechnikSysteme GmbH. Translation
of the original operating instructions. Misprints, er-
rors and technical changes are reserved. The
brands, brand names and protected trade marks
that are referred to in this document refer to their
owners or their products.
39