Tensioning/Replacing The Abrasive Belt; Dust Extraction - Parkside PBF 400 A1 Betriebsanleitung

Tensioning/replacing the abrasive
belt
WARNING! RISK OF INJURY
■ Always remove the power plug from the wall
socket before carrying out any work on the
bandfile.
♦ Loosen the clamping device for the abrasive
belt by pushing the clamping lever
(see fig. B). The abrasive belt
removed.
♦ Push the new abrasive belt
in the appliance housing. Important: The direc-
tion of the arrows on the inside of the abrasive
belt and on the device housing must match.
♦ Guide the abrasive belt
front rollers .
♦ Press the clamping lever
position.
Manually adjusting the abrasive belt:
If the belt tracking is not centred when you switch
on the appliance, you may need to manually
adjust it.
♦ To do this, turn the adjusting screw
abrasive belt is running centred. Important:
It is important to ensure that the abrasive belt
is not rubbing against the housing. Check the
belt tracking regularly and adjust it if required
with the adjusting screw
│ GB │ MT
■ 16
forwards
can now be
through the slot
over the rear and
back into its initial
, until the
(see fig. C).

Dust extraction

WARNING! RISK OF EXPLOSION!
■ If there is an explosive dust/air mixture, you
must use a specially-designed extraction
device.
RISK OF FIRE DUE TO FLYING SPARKS!
Do not use dust extraction systems (dust bags
or vacuum cleaners) when grinding metals.
WARNING! RISK OF FIRE!
■ There is a risk of fire when working with elec-
trical appliances that are fitted with a dust
bag or which can be connected to a vacuum
cleaner via a vacuum cleaner adapter. In un-
favourable conditions, e.g. when sparks are
flying while grinding metal or metal residues
in wood, wood dust in the dust bag (or in the
vacuum cleaner dust bag) can spontaneously
ignite. This is a particular risk if the wood
dust is mixed with paint residues or other
chemicals and the workpiece has become hot
after being worked for a long time. Therefore,
do not allow the workpiece or appliance to
overheat, and always empty the dust collec-
tor or the dust bag in the vacuum cleaner
before taking a break from work.
Wear a dust mask!
PBF 400 A1