Introduction; Intended Use; Features; Package Contents - Parkside PBF 400 A1 Betriebsanleitung

BANDFILE PBF 400 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The bandfile is designed for filing work, especially
on difficult-to-access locations, on wood, plastic,
metal and fillers in addition to painted surfaces.
Please note that you need to use appropriate
grinding belts with different grains for working dif-
ferent materials, and that you may need to adapt
the speed to suit the material. The appliance is not
intended for commercial use. Any other uses of
or modification to the appliance is deemed to be
improper and carries the risk of serious personal
injury. The manufacturer accepts no responsibility
for damage(s) attributable to misuse.

Features

Speed control
Locking button
Handle
ON/OFF switch
Dust bag
Side handle
Assembly and adjusting screw
Grinding frame, large
Clamping lever
Dust extraction adapter
Abrasive belt
Grinding frame, small
Grinding frame, angled
Spring
Front roller
Adapter fitting
│ GB │ MT
■ 12

Package contents

1 bandfile PBF 400 A1
5 abrasive belts for metal, wood, 8 x 455 mm
(2 x 60 grain, 2 x 80 grain, 1 x 120 grain)
5 abrasive belts for metal, wood, 13 x 455 mm
(2 x 60 grain, 2 x 80 grain, 1 x 120 grain)
1 dust bag
1 dust extraction adapter (for external dust
extraction)
1 straight frame, 8 mm
1 straight frame, 13 mm
1 angled frame, 13 mm
1 carrying case
1 set of operating instructions

Technical details

Rated voltage:
Rated
power consumption:
Idling belt speed:
Rated idling speed:
Abrasive belt:
Protection class:
Noise emission value:
Noise measurement value determined in accord-
ance with EN ISO 4871. The A-rated noise level
of the power tool is typically:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
230 V ∼ 50 Hz
(alternating current)
400 W
1070–1650 m/min
n 2350–3600
0
rpm
8 x 455 mm and
13 x 455 mm
II / (double insulation)
L = 82 dB(A)
pA
K = 3 dB
pA
L = 93 dB(A)
WA
K = 3 dB
WA
PBF 400 A1