Operation; Switching On And Off; Selecting Speed And Abrasive Belt; Tips And Tricks - Parkside PBF 400 A1 Betriebsanleitung

Dust extraction system with dust bag
(see fig. D):
♦ Press the handles of the wire ring on the dust
bag together so that it opens up.
♦ Now press the dust bag
fitting .
Dismantling/removing the dust bag:
♦ Press the handles of the wire ring on the dust
bag together so that it opens up. Pull the
dust bag off the appliance.
Connect the adapter for external dust extrac-
tion systems:
♦ Push the extraction adapter
bandfile so that its teeth slot into the notches
provided. Now screw the extraction adapter
tight in a clockwise direction.
♦ Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the extraction adapter
Removal:
♦ Pull off the hose of the dust extraction device.
♦ Turn the extraction adapter
and take it off the bandfile.
PBF 400 A1
onto the adapter
onto the
.
anticlockwise

Operation

Switching on and off
When operating the bandfile, you can choose
between instantaneous and continuous operation.
Switching to instantaneous operation:
♦ Press the ON/OFF switch
Switching off instantaneous operation:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
n and then press the lock button
Switching off continuous operation:
♦ Press the ON / OFF switch
it.

Selecting speed and abrasive belt

You can use the speed control
tional speed. The optimum belt speed is dependent
on the material being processed. We recommend
carrying out a practice run to determine the correct
speed.

Tips and tricks

■ Never use the same abrasive belt to process
wood and metal.
■ Worn or cracked abrasive belts can damage
the workpiece. Therefore, be sure to replace
worn abrasive belts before starting work.
■ Always hang up the abrasive belts to store
them, as kinks etc. can make them unusable.
.
.
, keep it pressed i
.
and then release
to select the rota-
GB │ MT │
17 ■