Scope Of Delivery; Intended Use; Safety Information - Scheppach HC550TC-400V Original Bedienungsanleitung

3. Scope of delivery

• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
• Compressor
• Air filter (3 units)
• Foot (2 units)
• Wheel (2 units)
• Assembly material
• Oil bottle
• Oil sealing plug
• Transport handle
• Translation of Original Operating Manual

4. Intended use

The compressor is designed to generate compressed
air for compressed-air driven tools.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
An element of the intended use is also the obser-
vance of the safety instructions, as well as the as-
sembly instructions and operating information in the
operating manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed
about potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting dam-
ages are excluded in the event of modifications of the
machine.
The machine may be operated only with original parts
and original accessories of the manufacturer.
The safety, work and maintenance instructions of the
manufacturer as well as the dimensions indicated in
the Technical Data section must be adhered to.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.

5. Safety information

General safety information
Attention! The following basic safety measures
must be observed when using electric tools for pro-
tection against electric shock, and the risk of inju-
ry and fire. Read all these notices before using the
electric tool and keep the safety instructions for later
reference.
Service and maintenance
1. Regular cleaning, maintenance and lubrica-
tion. Always pull the electrical plug before any
adjustment, maintenance or repair.
2. Have your device repaired only by qualified
experts and only with original replacement
parts. This ensures the continued safety of the
device.
Working safely
1 Keep your work area orderly
– A messy work area can cause accidents.
2 Consider environmental influences
– Do not expose electric tools to rain.
– Do not use electric tools in damp or wet envi-
ronments.
– Keep the work area well lit.
– Do not use electric tools where there is a risk
of fire or explosion.
3 Protect yourself from electric shock
– Avoid physical contact with earthed parts (such
as pipes, radiators, electric stoves or cooling
devices).
4 Keep other people away
– Do not let other people — especially children —
touch the electric tool or its cable. Keep them
clear of the work area.
5 Store electric tools safely when they are not in use
– Unused electric tools should be kept in a dry,
high or closed area, out of reach of children.
6 Do not overload your electric tool
– Work is better and safer within the performance
range indicated.
7 Use the right electric tool
– Don't use low-performance machines for
heavy-duty jobs.
– Do not use the electric tool for purposes for
which it was not intended. For example, do
not use a portable circular saw for cutting tree
branches or logs.
GB | 21