Scope Of Delivery - Mettler Toledo InPro X1 HLS Bedienungsanleitung

The inscription on each sensor contains the following information:
METTLER TOLEDO
InPro X1 ABC-Dxxx-Eyyy
pH 0 ...14
X ... Y °C (Z °C)
Order No. XX XXX XXX
Identification and number of certificates and code for FM testing are also found on the sensor
body. In addition each sensor is provided with a serial number on the red part of the plug-in
head in order to enable identification. This product meets the requirements of 3A, EHEDG,
EC1935 / 2004 and ATEX guideline 2014 / 34 / EU. The complete declaration can be down-
loaded under www.mt.com/InProX1HLS.

3.1 Scope of Delivery

Each sensor is supplied fully assembled, factory tested and calibrated for correct function
together with:
• Quality control certificate
• Quick setup guide
• Ex classification for pH sensors
• EC Declaration of Conformity
InPro X1 HLS pH Sensor • 30 467 449 A
Manufacturer of the sensor
Type designation:
A = Certifications
B = Reference system
C = Tip design
D = Redox yes / no
E = Cable connection
xxx = Shaft materials
yyy = Rod length in mm
pH measurement range
Operating temperature range (for cleaning)
Order number
17