Product Description; Scope Of Delivery; Packing; Sensor Designation - Mettler Toledo InPro 86 0i-Serie Bedienungsanleitung

12

3 Product description

InPro 86X0 i
30 421 372 C
3.1

Scope of delivery

Standard supply of the sensor is made up of the following:
– instruction manual
– certificates in accordance with the specifications
– blanking plate
On receipt of the shipment, check immediately:
– The sensor and accessories for any sign of transport damage. Report any damage immedi-
ately to the carrier and to your supplier.
– The type designation on the sensor body.
– For completeness of the supply. Please notify your supplier immediately if the shipment is
incomplete or in any way incorrect.
3.2

Packing

The packing consists of cardboard and foam plastic. Keep the packing for possible later use, such
as for storage or transport of the sensor. However, if you wish to dispose of the packing, please
observe your local regulations in this respect.
3.3

Sensor designation

Type designation
Sensor designation, product part number, serial number, material specifications as well as maxi-
mum permissible pressure and temperature can be noted from the product type plate.
Always include the product part number and serial number as minimum for clear identification
when communicating with the manufacturer.
InPro 86X0 i
1 = single-angle version (25°)
3 = dual-angle plus color version (25° and 90° plus color)
Example sensor label.
© 12 / 2018 Mettler-Toledo GmbH, CH-8902 Urdorf
InPro 86X0 i