Product Description; Introduction; Equipment And Scope Of Delivery - Mettler Toledo InPro 7000-V Bedienungsanleitung

InPro 7000-VP Series
1

Product description

1.1

Introduction

Thank you for buying this InPro
sensor from METTLER TOLEDO. InPro 7000-VP Series 2-electrode con-
ductivity sensors are intended to be used to measure conductivity in low
(high purity water) to medium conductivity water. The sensors are availa-
ble in a wide selection of process connections to meet every application
need.
Markings
The printed markings on each InPro 7000-VP Series 2-electrode conductivity
sensor contain the following information:
Mettler Toledo
InPro 700X-VP
Cell M: XXXXXX
Temp M: XXXXXX
Serial No: XXXXXXXXX
Ex-classification
Examination certificate number: SEV 14 ATEX 0129 X
Notified body:
1.2

Equipment and scope of delivery

Scope of delivery
The InPro 7000-VP Series sensors are delivered ready for use. Each sen-
sor is accompanied by this instruction manual, an individual «Certificate
of Quality», CE Declaration of Conformity Certificate and a Material Certificate
following EN 10204 (exceptions: InPro 7000-VP and InPro 7005-VP).
Other Certificates may be included as specified for the individual product.
Please check that the details given in the Certificate of Quality match the
sensor label. For each sensor, the relevant cell constant has been deter-
mined individually in an ultrapure water system at 25 °C (77 °F) during the
© 02 / 2017 Mettler-Toledo GmbH, CH - 8606 Greifensee
Printed in USA
7000-VP Series 2-electrode conductivity
®
Sensor manufacturer
Type of sensor
Cell constant
Temperature constant
Serial number
II I/2 G Ex ia IIC T3/T4/T5/T6 Ga/Gb
(metallic sensors / metallic sensors with
plastic surface)
Electrosuisse SEV, (No.: 1258)
InPro 7000-VP Series
52 002 091
5