General Maintenance; Removal Of Clogging And Blockage; Storage; Disposal And Protection Of The Environment - Parkside PLS 2600 A1 Originalbetriebsanleitung

Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
• Clean the collection bag (
a brush and, if needed, compressed
air.

General maintenance

• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
• Check covers and safety devices for
damages and correct installation. Re-
place as necessary.
Removal of clogging
and blockage
Leaf material and fresh plant parts may
clog / block the device.
Cleaning the impeller wheel:
Pull out the mains plug!
There is a risk of injury!
1. Loosen the Phillips screws (18).
2. Remove the central pipe (
3. Carefully remove any residue or block-
ages on the impeller wheel.
4. Check to make sure the impeller wheel
is easier to turn and is in undamaged
condition. Have our Service Centre re-
place a defective impeller wheel.
5. Reattach the central pipe (15) in the
reverse order.

Storage

• For storage, you can remove the central
pipe ( 15), the blower pipe (
the suction pipe (
tion bag ( 10) from the motor hous-
10) using
15).
11),
13) and the collec-
ing ( 5) again (see corresponding
installation instructions in the "Start-up"
section).
• Store the device in a dry place well out
of reach of children.
Disposal and protection
of the environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with
domestic waste.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost. Do
not throw it in the normal household
waste.
GB IE NI
17