Speed Table Mh35G ( ~50Hz Connection ); Speed Table Mh35V; Selecting The Speed; Gear Stage - Optimum Opti mill MH 35G Betriebsanleitung

4.7.1

Speed table MH35G ( ~50Hz connection )

Img.4-1:
4.7.2

Speed table MH35V

Img.4-2:
4.7.3

Selecting the speed

The correct speed is an important factor for milling. The speed determines the cutting speed by
which the cutting edges cut the material. The service life of the tool can be increased and the
working result optimized by selecting the correct cutting speed.
The ideal cutting speed basically depends on the workpiece and the tool material. Higher
speeds are possible with tools (mills) made from hard metal or cutting ceramics than with tools
made from high-alloy high speed steel (HSS). You will achieve the ideal cutting speed by se-
lecting the correct rotation speed by hand.
We recommend using a machining technology paperback
ISBN 978-3-8085-1473-3 (example, only in German language available). In these reference ta-
ble books you will find all the necessary and additional information. These machining technolo-
gy reference table books should bridge the gap between the predominantly theory-oriented
textbooks and reference & reference table books mostly written with the few theoretical princi-
ples in practice.
4.7.4

Gear stage


Changing the gear stage may only be at a standstill.
4.8

Direction of spindle rotation

A change in the direction of rotation at the MH35G is done by pressing the push button.
A change in the direction of rotation at the MH35V is only possible if the spindle rotates even in
its standard direction of rotation.
The standard direction of rotation is clockwise.

Cleaning and lubrication on page 79
EN
MH35G│MH35V
86 Translation of original instruction Version 1.1.0 - 2021-02-09