Gear; Cleaning And Lubrication - Optimum Opti mill MH 35G Betriebsanleitung

3.7.1

Gear

3.8

Cleaning and lubrication


Remove the anti-corrosive agents which has been applied to the milling machine for trans-
port and storage. We recommend you use paraffin for this purpose.

To clean the milling machine, do not use any solvents, nitro-cellulose thinner or other clean-
ing agents that could damage the paintwork. Observe the cleaning agent manufacturer's
information and notes.

Grease all exposed machine parts using an acid-free lubricating oil.

Lubricate the milling machine in accordance with the lubrication schedule.

Inspection and maintenance on page 93

Check that all spindles are running smoothly. All spindle nuts are re-adjustable.

Check the oil level of the spindle gearbox.
INFORMATION

Lubricant on page 134
The milling machine has been painted with varnish. This fact must be taken into account when
selecting your cooling lubricant.
Version 1.1.0 - 2021-02-09
Fill cap
Sight glass
Oil outlet
Translation of original instruction
MH35G│MH35V EN
79