Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-14
Operation
Start, interrupt, continue and
end the oven's operation
You have selected the function and set the
temperature. In order to
• start/continue the operation, tap the
sensor (2).
The lighting will switch on; the oven will
heat up. During the heating process, the
temperature display will flash. Up to eight
bars below the temperature display show
the progress of the heating process.
• interrupt the operation, tap the
sor (2) again.
The temperature display will flash to indi-
cate that the oven is no longer heating (up).
• end the operation, tap the
sor (13).
The oven is now in stand-by mode
The function and temperature can be
changed at any point during the cooking
process. The change will take effect approx.
6 seconds after the last sensor operation.
Opening the oven door has no impact on the
oven's operation. The oven will continue to
heat.
Oven lighting
Use the oven light only to illuminate the
cooking compartment. It is not suitable
for lighting a room.
(2)
The lighting can be switched on or off at any
time: Operate the
sen-
External cooling fan/extractor
The external cooling fan will cool the steam
emanating from the oven and grill and will
sen-
prevent adjacent furniture from becoming
too hot.
(14)
The air is vented through the extraction
hood (14) between the control panel and the
oven door.
NOTICE
sensor (3).
(3)
Werbung
Inhaltsverzeichnis
