Checking The Package Contents; Setting Up, Connecting And Starting Up The Appliance; Cleaning; Airflow - hanseatic HMO366BKB Gebrauchsanleitung

Seite EN-18 Moving and checking the package contents
1. Check that the delivery is complete.
2. Check whether the appliance was dam-
aged during transit.
3. If the delivery is incomplete or the appli-
ance has been damaged during transit,
please contact our Service department.

Setting up, connecting and starting up the appliance

Cleaning

Thoroughly clean the mini oven as described
in the following sections before using it for
the first time:
– "Cleaning solid plates and appliance sur-
faces" on pageEN-11
– "Cleaning the oven" on pageEN-16.

Airflow

Sufficient airflow must be ensured. In order to
do this, the following distances must be kept
to walls:
right: 12 cm
back: 12 cm
top: 30 cm.
– The appliance must not be built in to a cup-
board.
– Installing the appliance directly under a
worktop or cupboard is not allowed.
– The appliance's feet must not be removed.
– Do not use the appliance near or beneath
curtains, wall cabinets or other flammable
materials.
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Never use a damaged appliance.
– Place the appliance on a heat-resistant,
splash-proof surface.
– Never place the appliance on hot surfaces
(e.g. hotplates) or near open gas flames.

Connecting the appliance

1. Position the mini oven close to a freely
accessible earthed wall socket.
2. Plug the mini oven into a properly in-
stalled earthed wall socket.
The "POWER" LED illuminates to indicate
that the appliance is ready for operation.