♦
Switch on the drill to drive the product and pump the
liquid. Do not leave the product unattended. Make
sure that the drill is running clockwise. If the speed of
the drill is adjustable, you can use it to regulate the
flow rate.
♦
Switch off the drill after you have finished pumping
the liquid.
Cleaning and storage
ATTENTION! PROPERTY DAMAGE!
►
Do not use aggressive or abrasive cleaning agents,
as they can damage the surfaces of the product.
♦
Clean the surfaces of the product with a soft, dry cloth.
For stubborn dirt, use a slightly damp cloth with a little
mild detergent.
♦
Store the product in a clean, dry location out of direct
sunlight.
PBZS 5 A1
GB │ IE
│
11
■