Assembly - Parkside PBZS 5 A1 Originalbetriebsanleitung

Assembly

NOTE
► In addition to the supplied product, you will need
a drill with a round shank adapter, a 4.5 mm drill bit
and an AF 7 mm open-ended spanner.
► In addition, you will need a wooden board that the
product and the drill will fit on completely.
♦ Place the product and the drill on the wooden board
so that they rest completely on the wooden board.
Mark out the drill holes.
♦ Use a 4.5 mm drill bit to drill two holes in the wooden
board.
♦ Secure the product using the supplied screws, washers
and retaining nuts.
GB │ IE
■ 8
│ PBZS 5 A1