Pumping Water - Parkside PBZS 5 A1 Originalbetriebsanleitung

Pumping water

ATTENTION! PROPERTY DAMAGE!
► The product is self-priming and may only be allowed
to run dry for a maximum of 30 seconds.
►
► The temperature of the pumped liquid must not
exceed 40°C.
♦ Place the open end of the suction hose into the liquid
to be pumped. At least 1 metre of the suction hose
must be free of liquid in order to be able to pump the
liquid optimally. Make sure that the intake hose does
not draw in any air. The maximum suction height is
3 metres.
♦ Place the open end of the pressure hose where the
liquid is to be pumped. The maximum delivery height
is 15 metres.
■ 10
│
The maximum speed is 2800 rpm.
GB │ IE
PBZS 5 A1