Werbung
Verfügbare Sprachen
Verfügbare Sprachen
mA
MΩ
(8) Backlight
Turns the backlight on and off. The Backlight goes off
automatically after about 1 minute
(9) Test button
Starts or stops an insulation test when the rotary switch is in the
insulation
4000MΩ/1000V. Causes the meter to output a high voltage and
measure insulation resistance.
(10) Lock button
After you press TEST button to start insulation test, you can press
LOCK button to lock the insulation test. Locking the test means
that the meter outputs continuous test voltage and performs
continuous insulation test. To exit the locking state, just press
TEST button again.
For connection of the black test lead
during mA-measurements up to 400 mA.
Test current input terminal in insulation
test, for connection of the black test lead.
Test voltage output terminal in insulations
test, for connection of the red test lead.
test
position
4000MΩ/250V,
-31-
4000MΩ/500V
or
Werbung
