Herunterladen Diese Seite drucken

PeakTech 4395 Bedienungsanleitung Seite 24

2 in 1 dmm/isolationstester

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Use caution when working with voltages above 35V DC or 25V AC.
These Voltages pose shock hazard.
Replace the battery as soon as the battery indicator
With a low battery, the meter might produce false reading that can
lead to electric shock and personal injury.
Fetch out the battery when the meter will not be used for long
period.
Periodically wipe the cabinet with a damp cloth and mid detergent.
Do not use abrasives or solvents.
The meter is suitable for indoor use only
Do not store the meter in a place of explosive, inflammable
substances.
Do not modify the equipment in any way
Do not place the equipment face-down on any table or work bench
to prevent damaging the controls at the front.
Opening the equipment and service- and repair work must only be
performed by qualified service personnel
Measuring instruments don't belong to children hands.
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available mild
household cleanser. Ensure that no water gets inside the equipment to
prevent possible shorts and damage to the equipment.
1.1. Safety Symbols
AC (Alternating Current)
DC (Direct Current)
Important safety information. Refer to the manual.
Dangerous voltage may be present. Be cautious.
Earth ground
-23-
appears.

Werbung

loading