Activity Tracking; Drive Unit; Product Line - Bosch Drive Unit BDU3740 Originalbetriebsanleitung

Activity tracking

In order to record activities, it is necessary to register and
log into the eBike Flow app.
To record activities, you must consent to the storage of your
location data in the app. Without this, your activities cannot
be recorded in the app. For location data to be recorded,
you must be logged in as the user.
<eBike Lock>
The <eBike Lock> can be activated for each user via
the eBike Flow app. In the process, a key for unlocking the
eBike is saved on the smartphone.
The <eBike Lock> is automatically enabled in the following
cases:
– Switching off the eBike system via the control unit
– Automatically switching off the eBike system
– Removing the on-board computer
If the eBike system is switched on and the smartphone is
connected to the eBike via Bluetooth®, the eBike will be un-
locked.
<eBike Lock> is linked to your user account.
If you lose your smartphone, you can log in to your user ac-
count on the eBike Flow app using another smartphone and
unlock then the eBike.
Warning! If you select a setting in the app that could have
negative consequences in combination with the <eBike
Lock> (e.g. deleting your eBike or user account), you will be
shown warning messages beforehand. Please read through
these thoroughly and adhere to the warnings that are is-
sued (e.g. before deleting your eBike or user account).
Setting Up the <eBike Lock>
In order to be able to set up the <eBike Lock>, the following
conditions must be fulfilled:
– The eBike Flow app is installed.
– A user account has been created.
– The eBike is not currently updating.
– The eBike is connected to the smartphone via Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike battery is sufficiently charged and the charging
cable is not connected.
You can set up the <eBike Lock> in the eBike Flow app in
the Settings menu item.
From now on, you can deactivate the assistance from your
drive unit by switching on <eBike Lock> in the eBike Flow
app. This deactivation can only be can only be overridden if
your smartphone is in the vicinity of the eBike system when
the system is switched on. To do this, your smartphone must
have Bluetooth® switched on and the eBike Flow app must
be active in the background. The eBike Flow app does not
need to be open. When the <eBike Lock> is activated, you
can continue to use your eBike without assistance from the

drive unit.

Compatibility
The <eBike Lock> is compatible with these Bosch eBike
product lines:
Bosch eBike Systems
Drive unit
BDU374x
BDU33xx
How it works
In combination with the <eBike Lock>, the smartphone
functions similarly to a key for the drive unit. The <eBike
Lock> is activated by switching off the eBike system. As long
as the <eBike Lock> is active after the function is switched
on, this will be indicated by the operating unit System Con-
troller flashing white and by a padlock symbol on the dis-
play.
Note: The <eBike Lock> alone does not provide adequate
theft protection; it is simply a supplement to a mechanical
lock. The <eBike Lock> does not provide any form of mech-
anical lock for the eBike. Only the assistance from the drive
unit is deactivated. The drive unit will be unlocked for as long
as the smartphone is connected to the eBike via Bluetooth®.
If you wish to give other users temporary or permanent ac-
cess to your eBike or you want to take your eBike to servi-
cing, you will need to deactivate the <eBike Lock> in
the eBike Flow app in the Settings menu item. If you wish to
sell your eBike, you will also need to delete the eBike from
your user account in the eBike Flow app in the Settings
menu item.
When the eBike system is switched off, the drive unit will
emit a "Lock" sound (i.e. an audio signal that is played once)
to indicate that the assistance from the drive unit is switched
off.
Note: The audio signal will only be played if the system is
switched on.
When the eBike system is switched on, the drive unit will
emit two "Unlock" sounds (i.e. an audio signal that is played
twice) to indicate that the assistance from the drive unit is
enabled again.
The "Lock" sound will help you determine whether or not
the <eBike Lock> on your eBike is active. The audio signal is
activated by default, but it can be deactivated in the eBike
Flow app in the Settings menu item by selecting the lock
symbol below your eBike.
Note: If you can no longer set up or switch off the <eBike
Lock>, please contact your bicycle dealer.
Replacing eBike Components and the <eBike Lock>
Replacing the Smartphone
1. Install the eBike Flow app on the new smartphone.
2. Log in with the same account that was used to activate
the <eBike Lock>.
3. The <eBike Lock> is displayed as set up in the eBike
Flow app.
Replacing the drive unit
1. The <eBike Lock> is displayed as deactivated in
the eBike Flow app.
2. Activate the <eBike Lock> by pushing the <eBike
Lock> controller to the right.
English – 5

Product line

Performance Line CX
Performance Line
0 275 007 3RC | (25.03.2022)