Switching The Oven On/Off; Selecting A Function; Thermostat Control - hanseatic HBO7213PA1 Gebrauchsanleitung

Page EN-14 Operating the oven
4. Tap the sensor or swipe over the slid-
er to set the number of minutes.
5. Tap the symbol to set the time
The colon between the hour and minutes
will flash.

Switching the oven on/off

As soon as a power supply has been con-
nected, the oven will be in stand-by mode. In
order to switch
– on the oven, tap the sensor
The display will show the current function
and the standard temperature.
– to stand-by mode, tap the sensor
– off the oven, you must pull the mains plug
out of the socket or switch off the applica-
ble electric circuit.
If the door is opened during the function
operation, the operation will be paused

Selecting a function

Function describes the method of heating.
Your appliance's functions can be found in
the table on Seite EN-15.
Further information on the individual settings
can be found in the
– section „Special features for some heating
.
methods" auf Seite EN-19
– enclosed brochure "Baking, roasting and
cooking".
1. Tap the
The display shows the current function and
the standard temperature.
2. To select another function, tap on the sen-
sor
.
function.
.

Thermostat control

You can change the temperature before and
during cooking.
1. Tap the
The temperature indicator flashes.
2. You have two options to change the tem-
perature.
– Tap on the sensor
as many times as required until the dis-
play shows the desired temperature.
– Slide a finger over the slider until the dis-
play shows the desired temperature.
The temperature indicator initially flashes.
Once it lights up permanently, the oven
saves your setting.
sensor.
until the display shows the desired
sensor.
or the sensor