Setting The Time; Switching The Oven On/Off; Selecting A Function; Setting The Temperature And Cooking Time - hanseatic HBO7213A1 Gebrauchsanleitung

Setting the time

You must set the time when using the oven for
the first time or after a power cut. The display
shows .
00 : 0 0
The time is displayed in 24-hour format.
1. Tap the TEMP/TIME sensor to access the
setting mode.
flashes in the display on the
HR:MIN 00:00
right dial.
2. Turn the right dial until the display on the
dial shows the current hour (
3. To save the setting, tap the TEMP/TIME
sensor again.
4. Turn the right dial until the display shows
the current minute ( -
0
5. To save the setting, tap the TEMP/TIME
sensor.
The display will now show the set time. The
colon between the hour and minute flashes
continuously to show that the appliance is
in stand-by.

Switching the oven on/off

As soon as a power supply has been connect-
ed, the oven will be in stand-by mode.
In order to switch
– to the energy-saving mode "Off", tap the
ON/OFF sensor.
– back to stand-by mode "ON", tap the ON/
OFF sensor again.
The display on the right dial shows the time;
the colon flashes continuously.
– off the power supply, you must pull the
mains plug out of the socket or switch off
the applicable electric circuit.
- ).
0 23
).
59
Operating the oven
Opening the oven door has no impact
on the oven's operation. The oven will
continue to heat.

Selecting a function

"Function" describes the method of heating.
Your appliance's functions can be found in the
table on Seite EN-15. Further information on
the individual settings can be found in the
– section „Special features for some heating
methods" auf Seite EN-17,
– enclosed brochure "Baking, roasting and
cooking".
You can select the function before and during
cooking:
• Turn the left dial until the display on the
dial shows the corresponding symbol.
The display will now show the default tem-
perature for the selected function.
Setting the temperature and
cooking time
You can change the temperature and cooking
time before and during cooking:
1. If you want to adjust the setting during
cooking, tap the TEMP/TIME sensor.
2. Turn the right dial until the display on the
dial shows the required temperature.
Page EN-13