Setting The Time; Switching The Oven On/Off; Selecting A Function; Thermostat Control - hanseatic HBO7212A1 Gebrauchsanleitung

Setting the time

You must set the time when using the oven
for the first time or after a power cut. The dis-
play shows .
00 : 0 0
The time is displayed in 24-hour format.
1. Tap the sensor.
will flash on the hour indicator.
00
2. Turn the < > dial until the display shows
the current hour ( –
0 23
3. To save the setting, tap the
again.
will flash on the minute indicator.
00
4. Turn the < > dial until the display shows
the current hour ( –
0 59
5. To save the setting, tap the

Switching the oven on/off

As soon as a power supply has been con-
nected, the oven will be in stand-by mode. In
order to switch
– on the oven, tap the
The display will show the current function
and the standard temperature.
– to stand-by mode, tap the
– off the oven, you must pull the mains plug
out of the socket or switch off the applica-
ble electric circuit.
Opening the oven door has no impact
on the oven's operation. The oven will
continue to heat.
).
sensor
).
sensor.
sensor.
sensor.
Operating the oven

Selecting a function

Function describes the method of heating.
Your appliance's functions can be found in
the table on Seite EN-14.
Further information on the individual settings
can be found in the
– section „Special features for some heating
methods" auf Seite EN-17
– enclosed brochure "Baking, roasting and
cooking".
You can select the function before and during
cooking:
• Turn the function dial F until the display
shows the corresponding symbol and its s
andard temperature.

Thermostat control

You can change the temperature before and
during cooking:
1. Tap the sensor.
2. Turn the temperature controller < > until
the display shows the desired temperature.
After a short time, the temperature will light
up permanently.
Page EN-13