Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Software-dependent requirements
The complete description of the configuration of the AS-i safety
monitor has to be taken into account!
Installation
Mount the module onto a wired FC or FC-E lower part (e.g. AC5000 or
AC5003) and then onto a 35 mm rail or fasten it onto a suitable
mounting surface.
The mounting position can be vertical or horizontal. Then carefully lay
the flat cable into the lower part using the supplied seals.
To observe the specified protection class, the 4 screws of the upper part
must be tightened evenly crosswise with 0.8 Nm. When mounting the
module ensure that the seal is carefully inserted.
Operating elements and indicators
LED 4
red
LED 4 rot
LED 1 gelb
LED 1
yellow
LED 5
LED 5 gelb
yellow
M12 Buchse
M12
socket
16
ERROR
I-1
LED AUX green
LED AUX grün
LED 3
LED 3
infrared receiver
Infrarot-Empfänger
O-3
AUX
fixture
infrared
Fixierung für
FAULT
adapter
IR-Adapter
PWR
LED 2 red
LED 2 rot
LED PWR grün
LED PWR
green
Beschriftungs-
labels
felder
Werbung
Inhaltsverzeichnis
