Safety Instructions - IFM Electronic AC016S Originalbetriebsanleitung

Safety instructions

Follow the operating instructions.
Non-observance of the instructions, operation which is not in
accordance with use as prescribed below, wrong installation or
handling can affect the safety of people and the plant.
For mounting and prescribed use of the product the notes in the
operating instructions must be carefully observed and the applicable
technical standards relevant for the application have to be considered.
In case of non-observance of notes or standards, specially when
tampering with and/or modifying the product any liability is excluded.
The unit must be installed, connected and put into operation by a
qualified electrician trained in safety technology.
After set-up the system has to be subjected to a complete function
check.
Disconnect the unit externally before handling it. Also disconnect any
independently supplied relay load circuits.
For installation the requirements according to EN60204-1 must be
observed.
In case of malfunction of the unit please contact the manufacturer.
Tampering with the unit can seriously affect the safety of people and
the plant. This is not permitted and leads to an exclusion of liability and
warranty.
13