IFM Electronic AC016S Originalbetriebsanleitung Seite 15

Important note:
The products described herein are designed to be components of
a safety-oriented machine or control system. A complete safety-
related control system may include fail-safe sensors, evaluators,
actuators and signalling components. It is the responsibility of
each company to conduct its own evaluation of the effectiveness
of the safety system. The manufacturer of the AS-i safety
module, his subsidiaries and affiliates are not in a position to
evaluate all of the characteristics of a given machine or product.
The manufacturer accepts no liability for any recommendation that
may be implied or stated herein.
The warranty contained in the contract of sale is the sole warranty. Any
statements contained herein do not create new warranties or modify
existing ones.
Configuration requirements
The following requirements must be complied with when using the
evaluation unit AC016S.
Hardware-dependent requirements
It must be ensured that the safety requirements of the respective
application correspond to the requirements stated in these
instructions. The specified technical data must be complied with.
By taking administrative measures in the application it must be ensured
that a function check is carried out at least once a year. A function
check is carried out by switching the AS-i supply voltage or the
evaluation (data bit D0, 0 = evaluation ON) briefly off.
In case of faults within the evaluation unit which result in the defined
safe state, the evaluation unit must be replaced.
15