B-510Ld4D; Installing The Pc Screen (B-510Ld4D); Cable Connection (B-510Ld4D) - Optika B-510 Serie Bedienungsanleitung

8.5

B-510LD4D

1. Insert the round dovetail socket of the illuminator ① into the
hole in the microscope body and tighten the locking screw
②. (Fig. 24)
2. Insert the multipower cable jack in the connector ③ placed at
the rear side of the microscope. (Fig. 26)
8.6

Installing the PC screen (B-510LD4D)

• For the camera installation, please refer to chapter 17.1.
1. Align and screw the fixing knobs ① with the holes ② on the
monitor. (Fig. 27)
8.7

Cable connection (B-510LD4D)

1. Connect the USB mouse / keyboard receiver in the slot "A" of
the PC stick. (Fig. 28)
2. Plug the USB3.0 cable in the slot "B" of the PC stick. (Fig. 29)
①
Page 30
③
F ig. 26 F
F ig. 27 F
Ⓐ
F ig. 28 F
Ⓑ
F ig. 29 F
ig. 26
②
ig. 27
ig. 28
ig. 29