B-510Fl - Optika B-510 Serie Bedienungsanleitung

8.3

B-510FL

1. Using the provided Allen wrenches, remove the lamp housing
from the illuminator using the tightening screws ①. (Fig. 15)
2. Insert the lamp housing extension tube and tighten the
screws ②. (Fig. 16)
3. Reassemble the lamp housing and tighten the screws ①.
(Fig. 17)
4. Insert the round dovetail socket of the illuminator ③ into the
hole in the microscope body and tighten the locking screw
④. (Fig 18)
①
②
①
Page 27
F ig. 15 F ig. 15
F ig. 16 F ig. 16
F F ig. 17 ig. 17
③
④
F ig. 18 F ig. 18