B-510Ld4/B-510Ld4-Sa - Optika B-510 Serie Bedienungsanleitung

8. Insert the lamp housing cable into the fluorescent power
supply, aligning the notches on the connectors. (Fig. 22)
9. Insert the power cord into the socket ①. (Fig. 23)
Before connecting the power cord, secure the
lamp housing cable to the power supply.
If the power cord is connected before,
there may be a risk of electrical shock.
8.4

B-510LD4/B-510LD4-SA

1. Insert the round dovetail socket of the illuminator ① into the
hole in the microscope body and tighten the locking screw
②. (Fig. 24)
2. Insert the power supply jack in the connector ③ placed at the
rear side of the illuminator. (Fig. 25)
①
①
Page 29
F ig. 22 F ig. 22
F ig. 23 F ig. 23
②
F ig. 24 F ig. 24
③
F ig. 25 F ig. 25