SPORTSTECH CX625 Benutzerhandbuch Seite 34

2.8 INSTALLATION OF THE SENSOR BRACKET
Remove two screws (19), two washers (20) and two PVC washers (21) from the front pillar (2) and keep
•
them safely.
Guide the hand pulse sensor cable (14) from the sensor bracket (11) through the hole in the front pillar
•
(2) . Then pull them to the top end (2).
• Fix the sensor bracket (11) to the front pillar with the previously removed parts (2).
2.9. MOUNTING THE COMPUTER
Remove four screws (17) from the back of the computer (16).
•
Connect sensor cable I (18) and hand pulse sensor cable (14) to the cables coming from the
•
computer (16).
Fix computer (16) with the previously removed four screws (17) to the top of the front pillar (2).
•
34
19 20
21
11
M5 x 10 mm
M8 x 15 mm
Ø8 x Ø16 mm
Ø10 x Ø20 mm
14
19
2
19
20
21
16
18
14
17
2