Mounting The Flap - Zodiac MEDLINE 6.8 Bedienungsanleitung

The two flaps (waterproofing and outside) must pass over the hull bow.

2.3. MOUNTING THE FLAP

Mounting with inserts:
4
Fit the tube and mount the outer flap (with the tube deflated) using the stainless strips and
screws provided in the tube kit. To ensure that the assembly remains in place, place some
medium strength threadlock on the screws.
Mounting using through bolts:
4
After inflating the tube (refer to the following chapters), attach the outer flap using the stainless
bars and the bolts provided in the tube kit. To ensure that the complete assembly is sealed, place
sealant on the bolts and in the holes in the hull.
TUBE – INFLATING THE TUBE
Page 16 / 50
Edition 2