General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PBHA 12 A1 Originalbetriebsanleitung

GB IE
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
The device is part of the Parkside
X 12 V TEAM series and can be opera-
ted using Parkside X 12 V TEAM series
batteries. The batteries may only be
charged using chargers from the Parkside
X 12 V TEAM series.

General description

The illustrations are on the
front and back fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Battery-operated hammer drill
- 1 x 10mm quick-release drill chuck
with SDS Plus adapter
- 2 x SDS Plus drill bit, 6 mm and 8 mm
- 2 x drill bit for wood, 3 mm and 5 mm
- 4 x 50mm screw bits: S2, PH2, PH1,
TX25
- Storage case
- Instruction Manual
Battery and charger are not included.
Observe the safety informa-
tion and notes on charging
and proper use as shown
in the instruction manual
for your battery and char-
ger from the Parkside
X 12 V Team series.
A detailed description of the
charging process and further
information can be found in
the separate operating inst-
ructions.
20

Overview

1 SDS Plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Changeover switch "drilling/im-
pact drilling"
5 Changeover switch retaining
knob
6 Charge status indicator LED
7 Direction of rotation switch
8 On/off switch
9 Battery
10 Button for unlocking the battery
pack
11 LED working light
12 Case
13 Quick charger
14 Screw bits
15 Wood drill bits
16 Drill bits with SDS Plus receptor
17 Keyless chuck

Functional description

The cordless impact drill is equipped with
an SDS Plus tool holder (non-removable),
a removable keyless drill chuck, right/left
rotation and an LED work light.

Technical data

Cordless Hammer Drill PBHA 12 A1
Motor voltage U ..........................12 V
Idling speed n ......................0-900 min
0
Impact rate: .........................0-4800 bpm
Impact energy: ............................ 1 joule
Span-chuck ............................ 0.8-10 mm
Weight (without battery) ...............1,15 kg
Drilling capacity
for concrete ...................... max. 10 mm
for wood .......................... max. 10 mm
-1