Cleaning - Keimling Naturkost Soyabella SB-130 Bedienungsanleitung

Soyabella™ SB-130
Operating Instructions
G.

Cleaning

Be sure to clean Soyabella thoroughly after every use. Proper cleaning will ensure that Soyabella pro-
duces great results for years to come.
Please note: To avoid protein build-up, clean the screen immediately after use.
1. Unplug the unit.
2. Place the head unit with the screen still attached into the utility
cup to cool, making sure that the handle under the steel screen
fi ts within the corresponding groove in the plastic utility cup.
TIP: For faster cleanup, add cold water to the utility cup to soak
the screen.
3. In order to let the screen cool quickly enough to allow quicker
clean-up, use the utility cup to detach the screen from the head
unit. Grasp the top of the head unit with one hand, and use your
other hand to get a solid grip on the utility cup. Twist the utility
cup in the direction indicated on the screen until the screen is
unscrewed from the head unit (see fi gure 1).
4. The screen will be hot! Please protect your hands while transferring
the pulp to a container for cooking or while throwing it away. After
removing the pulp from the screen, place the utility cup (with the screen still inside) under running
water until it cools.
5. When it is cool enough, use the cleaning pad and cleaning brush to scrub the screen clean with
hot, soapy water - this will prevent protein deposits from clogging the holes in the screen. It is
best to clean the screen in the dishwasher, since dishwasher detergent is especially well-suited for
removing protein residues. Ensure that the screen is cleaned thoroughly, making sure all holes are
open, as a blocked screen can affect the consistency of the milk in future operations. Once protein
deposits clog the holes in the screen, it can be extremely diffi cult to remove them.
Caution!
Moisture
Evaporating
Hole
Figure 2
36
Caution:
When cleaning the head unit, do not immerse it into water or pour water over the
electrical components. Do not let water enter the moisture-evaporating hole (see
fi gure 2). Use a wet cloth to clean the head unit.
Figure 1