Grinding - Keimling Naturkost Soyabella SB-130 Bedienungsanleitung

Soyabella™ SB-130
Operating Instructions
F.

Grinding

Follow these instructions to grind coffee, nuts,
grains, or seeds.
1. Load grinding cup
Using the measuring cup, take a full cup
of coffee beans, nuts, grains, or seeds and
load them into the grinding cup.
2. Attach the grinding cup
to the head unit
Attach the grinding cup to the head unit by
moving the blade in a side-to-side motion
to allow the grinding cup to slide properly
into place. Lock the grinding cup by tur-
ning it. The markings on grinding cup indi-
cate the proper lock and unlock directions.
Caution: Be sure the grinding cup is pro-
perly locked in place! If the grinding cup
becomes loose during operation, the spin-
ning blade could damage the grinding
cup.
3. Assemble machine and
run MILK function
Connect the head unit to the stainless steel
chamber. Make sure the upper plug slides
into the upper plug receptacle on top of
the handle. Plug the provided power cord
into the power plug receptacle, and con-
nect the other end to a wall socket. Once
plugged in, Soyabella will beep and a red
light will fl ash, indicating that the power
is on. Choose the grinder setting by pres-
sing the MILL button on the head unit,
and the fl ashing red light will turn solid.
The grinder will immediately begin mil-
ling your ingredients for approximately
10 seconds.
4. Enjoy your freshly ground coffee, nuts,
grains, or seeds
Unplug the base unit. Lift the head unit
from the stainless steel chamber. Carefully
unlock the grinding cup and remove it
from the head unit. Your ingredients are
ready to be enjoyed.
TIP: If further grinding is needed, follow direc-
tions from step 2 and run through another cycle.
35