Using As A Led Light; On/Off Switch; Using As A Charger - Parkside PFLA 4400 A1 Bedienungs- Und Sicherheitshinweise

NOTE: The energy stored in the rechargeable batteries power both the
LED light and the charging station . Using the product as a charger therefore
reduces the operating time and brightness in lighting mode .
˜ Using as a LED light
Fully charge the product as described in the section "Charging the
product" .
The product can be operated in 4 different modes . Select these by
repeatedly pressing the ON/OFF switch

ON/OFF switch

˜ Using as a charger
When used with the USB cable
small electronics devices with USB socket (Type micro) for charging
(e .g . mobiles or digital cameras) .
The charging current the device requires may not exceed 2 A . Carefully
read the instructions for use of the device you wish to charge .
ATTENTION! Charging a device which requires a higher charging current
may cause a defect in both devices .
Press 1x:
Press 2x:
Press 3x:
Press 4x:
Press 5x:
10 ] [
.
[ 2 ]
Mode
100 % brightness
50 % brightness
SOS signal
Flashing
Switch off the light
, the product may be used to charge
GB/IE/NI 15